Are your shelves overrun with MG, HG and RG kits that need time in the spotlight? Or have you been itching to recreate your favorite space battles but don't want to fight with fishing line and complicated dioramas? We are proud to introduce an affordable, stable, and slick looking wall solution; compatible with Official Action Base 2, Action Base 4 and Action Base 5 Stand Arms (not Included) for 1/100 and 1/144 Scale Models. Our Mount base also includes extra mounting holes for stand arms and for official Effect pegs. Our design allows for a 10 degree down angle to allow for a greater range of posing options.
We always design for simple, quick, and secure mounts to ensure you can take it out of the box, peel off the protective paper and mount it on your wall as fast as possible!
Instructions:
bit.ly/CPCInstructions
Small Mount - 1 Mounting point
What you get:
2x Self Drilling Drywall Anchors
2x Wood Screws
1x Wall Mount Brace
1x Display Platform
1x Display Locking Brace
1x Mount Locking Brace
2x Mounting Bracket
Large Mount - 3 Mounting point
What you get:
4x Self Drilling Drywall Anchors
4x Wood Screws
2x Wall Mount Brace
1x Display Platform
2x Display Locking Brace
2x Mount Locking Brace
4x Mounting Bracket
Each mount is shipped with paper masking on the back of each piece to help protect it during shipping. This must be peeled off before construction. We recommend using the included Cat Token to help start the peeling process.
This mount is designed to fit ONLY official Action base 2 (not Included), Action Base 4 (not included) and Action Base 5 (not Included) stand arms for1/100 and 1/144 Scale Models (not Included). CPC LLC is not liable for damage to walls, models, or action bases due to improper installation, by placing too much stress and weight on the mount or not balancing your model properly. We highly recommend only using peg based models for display, use Clamp or Cradle style connections at your own discretion.
Acrylic is brittle at joints, avoid using significant force when locking pieces in place. If a piece feels stuck, jiggle back and forth to loosen the pressure fit and ensure each slot is lined up properly.
Each hole for Action Base Arms are cut to be an average of all Variance from Bandai's production.
Action Base Arms should have a snug but not stiff fit. If the Arm is loose we recommend adding a thin layer of paint, Glue, Masking Tape, or Nail Polish (Let them dry!) to the peg to get a better fit.